Home / Support / Electronic / Powerbolt Electronic Deadbolt
Support
Discontinued
Finishes
-
Satin Nickel - Lifetime Polished Brass
- Venetian Bronze
Ask A Question Register Product
Documents
Note: Do not use prints from this website to mark distances. Due to individual printers, dimensions on installation instructions may not print at an accurate scale.
Answers
Support answers found: 7
Choose a Topic
- Battery
-
-
Answer On the interior side of the lock where the program button is located, there is a jumper that will change the direction of the door. The peg comes off and will either cover the ""A"" and ""B"" or the ""B"" and ""C"".The link below on page # 6 illustration #4 will guide you on how to change the direction of the door.Click here. Read More -
Answer There is a thick door screw package available for this unit. It is model# 86129. This can be special ordered at the customer service desk of your local home improvement retailer. You can also contact Kwikset Consumer Service at 1-800-327-5625 for assistance in obtaining it. Read More -
Answer Resetting the unit:1. Remove batteries.2. Push program 3 times.3. Push all the buttons on keypad in sequence.4. Push the lock button. Read More -
Answer 1. Remove the three screws to the left right and bottom of the lock using either a Phillips head screwdriver or a 3/32 Allen Wrench if the installer had used the tamper-proof screws.2. If there are no screws present, please just remove top portion by grabbing the cover from the sides and lifting up before pulling the cover off.How to remove/install batteries-1. Remove the three screws to the left right and bottom of the lock using either a Phillips head screwdriver or a 3/32 Allen Wrench if the installer had used the tamper-proof screws. If there are no screws present, proceed to step 2.2. Remove the full battery cover (this may include the finished thumb turn portion) to gain access to the battery holder.3. Remove the battery holder from the lock. This piece will have the word “Door” written on it with an arrow on either side pointing at the door.4. Replace the batteries with 4 good quality Alkaline AA batteries.5. Replace battery pack in the lock. Read More -
Answer For assistance in a key pad for your lockset and warranty support please contact Kwikset Consumer Service at 1-800-327-5625. Read More -
Answer You can make guesses, but each three consecutive failed attempts will result in the Powerbolt locking out for 60 seconds.If you forgot your user code, there are two options:1. Add new user codes.2. Reset Powerbolt to factory settings to clear existing user codes and add new ones. Read More
Community Q&As
{{/each}}
