How to connect GL iNet to Wi-Fi wirelessly?

You can connect to router via an ethernet cable or via Wi-Fi. Connect your computer to the LAN port of the router via Ethernet cable. Search for the SSID of the router in your computer/phone/tablet and input the WiFi password . Please find the WiFi password on the label on the back of the router.

How do you reset the gl MT6000?

Press and hold the “Reset” button on the MT6000, then plug in the power lead while still holding the button. Keep holding the button and wait for the LED to stabilize (about 10 seconds). Then release the button. On your computer web browser, go to 192.168.

What is the default Wi-Fi password for GL router?

Wireless connection: Search for the SSID of the router in your device and input the default password: goodlife in order to connect.

How do I access my router management interface?

In most cases, you just need to enter the router's IP address into a web browser and then log in with the default admin username and password . For some routers, you can log in with a mobile app. This wikiHow guide will walk you through the simple steps of accessing your home router from your computer, phone, or tablet.

How do I connect my phone to my Wi-Fi router via USB?

Step1: Connect your Android smart phone to ASUS Router with USB cable . Step2: Enable USB tethering on your Android smartphone Android. [Note] For the setting, please refer to the product manual that you purchased. Step3: Connect your PC to ASUS router via Wi-Fi or Ethernet cable.

What is the mode button on a GL iNet router?

Configure the function of the mode switch. It doesn't have any function by default. You can set it as a toggle to turn on or off WireGuard/OpenVPN client .

What is the IP address for GL iNet?

The default IP address of GL. iNet router is 192.168. 8.1 . If it conflicts with the IP address of your main router, you can change it.

What is my Wi-Fi router admin password?

Retrieve Default Username and Password: You can usually find these details in the Router Manual or Handbook, or on a sticker located on the bottom or back of your router. The default username is often admin, and the password is typically either admin or password .

What is the general password for Wi-Fi?

Every router requires a username and password before you can access the interface. In many cases the default username is "admin" and the password is "admin" or "password" . Of course this varies from model to model, so you should check your model online to see your exact login information.

Where do I find password on Wi-Fi router?

You can find the default network name and password in the label on the back of your router or gateway . If you're an admin user and have previously changed your network name and password, you can use another method listed to make this change to your account.

How to find router username and password without resetting?

Check the sticker on your router . Unless you've changed your home router's admin password, it's likely still set to the manufacturer's default. You'll also find the default Wi-Fi network name and password printed on the router. Both passwords may be listed on the same or separate stickers.

What is my default IP address?

Type ipconfig into the Command Prompt. Then, you'll be able to find your gateway IP address listed next to the Default Gateway item .

How do I connect my wireless USB adapter to Wi-Fi?

Insert the adapter into a USB port on your computer directly. Click or (Network icon) on the task bar, select your Wi-Fi network, and click Connect .

How do I turn on Wi-Fi on my ZTE?

Touch Apps. Scroll to and touch Settings. Touch Wi-Fi. If Wi-Fi is off, touch the Wi-Fi slider to turn it on .

GL-MT6000 (Flint 2) - GL.iNet Router Docs 4 (2024)

Hardware info¶

Flint 2 (GL-MT6000) is a Wi-Fi 6 home and office router ideally suited for heavy-duty data transmission, mass device connectivity or ultra-low latency gaming environments. Flint 2 offers blazing-fast WireGuard VPN speeds of up to 900Mbps. In addition, it also supports advanced network redundancies, including Multi-WAN, Failover and Load balance to ensure an uninterrupted network.

Specification¶

GL-MT6000 specification

First time setup¶

All of GL.iNet's devices have a simple and almost identical setup process, click here to learn about the first time setup.

Please note that the adapter within the package depends on your shipping country.

What's inside the package?

Package Contents:

1 x GL-MT6000 Router
1 x Power Adapter
1 x Ethernet Cable
1 x User Manual & Warranty Card
1 x Converter
1 x Thank You Card

INTERNET¶

The internet configuration interface lets users choose to establish the type of internet connection supported by the router.

Configure the internet network by selecting INTERNET in the side menu within the router's web Admin Panel.

It supports four ways to connect to the internet as listed below:

Ethernet¶

Transmit data over an Ethernet cable using an Ethernet cable to connect the router to an active modem or an active network device. This method usually provides the fastest and most reliable Internet connection.

Click here to learn how to connect to the internet via an ethernet cable

Repeater¶

Extend the Wi-Fi coverage area of an existing Wi-Fi network by using a router to receive wireless signals within range and forwarding the signals to a further distance. This method is most useful when a single router does not have enough range to cover the entire usage area.

Click here to learn how to connect to the internet via an existing Wi-Fi

Tethering¶

Establish internet access with connected devices by sharing a smartphone's mobile data to the router via cable. This method is most useful when users wants to use the phone's data to access the internet.

Cellular¶

Connect the router to the internet by inserting a cellular enabled USB modem into the router's USB port. This method is most useful for sharing internet access from a USB modem to all connected devices.

Click here to learn how to connect to the internet via usb modem

Priority and load balance¶

Go to Multi-WAN to set the priority of each Internet access method or the load balance when multiple Internet access methods are used at the same time.

WIRELESS¶

The wireless settings lets users manage network security of the primary Wi-Fi and the Guest Wi-Fi, it is accessible by going to WIRELESS on the side menu.

Click here to learn more about the wireless configuration

CLIENTS¶

Clients are devices connected to the router, you can block clients or limit its network speed. The interface is accessible by clicking CLIENTS in the side menu of the router's Admin Panel.

Click here to learn more about managing your device clients.

VPN¶

GL.iNet routers have pre-installed VPN server and client in OpenVPN and WireGuard.

VPN Dashboard¶

VPN Dashboard

OpenVPN¶

Please refer to the links below for the detailed setup instruction:

Setup OpenVPN Client
Setup OpenVPN Server

WireGuard¶

Please refer to the links below for the detailed setup instruction:

Setup WireGuard Client
Setup WireGuard Server

Tor¶

APPLICATIONS¶

Plug-ins¶

Please visit the Plug-ins tutorial.

Dynamic DNS¶

Please visit the Dynamic DNS tutorial.

GoodCloud¶

Please visit the GoodCloud tutorial.

Network Storage¶

Please visit the Network Storage tutorial.

AdGuard Home¶

Please visit the AdGuard Home tutorial.

Parental Control¶

Please visit the Parental Control tutorial.

ZeroTier¶

Please visit the ZeroTier tutorial.

Tailscale¶

Please visit the Tailscale tutorial.

NETWORK¶

Firewall¶

GL.iNet's routers include multiple firewall features to ensure a secure connection and complete oversight by users. It lets users configure firewall rules including Port Forwarding, Open Ports, and DMZ.

Click here to learn more about GL.iNet routers' firewall

Multi-WAN¶

Please visit the Multi-WAN tutorial.

LAN¶

Please visit the LAN tutorial.

DNS¶

Please visit the DNS tutorial.

Network Mode¶

Please visit the Network Mode tutorial.

IPv6¶

Please visit the IPv6 tutorial.

MAC Address¶

The Mac Address page was previously called Mac Clone and has been changed to Mac Address since v4.2.

Please visit the MAC Address tutorial.

Drop-in Gateway¶

Please visit the Drop-in Gateway tutorial.

IGMP Snooping¶

Please visit the IGMP Snooping tutorial.

Network Acceleration¶

Formerly known as Hardware Acceleration.

Please visit the Network Acceleration tutorial.

SYSTEM¶

Overview¶

Please visit the System Overview tutorial.

Upgrade¶

GL.iNet provides regular updates on our routers' firmware to improve performance, resolving bugs and fix vulnerabilities.

Please visit the Upgrade tutorial.

Scheduled Tasks¶

Please visit the Scheduled Tasks tutorial.

Time Zone¶

Please visit the Time Zone tutorial.

Log¶

Please visit the Log tutorial.

Security¶

This feature is available since v4.5.

Please visit the Security tutorial.

Reset Firmware¶

Please visit the Reset Firmware tutorial.

Advanced Settings¶

Please visit the Advanced Settings tutorial.