15 minute Countertop Plant Stand (2024)

Create a countertop garden with this 15 minute craft.

Clay pots and a cedar fence picket are turned into a beautiful kitchen herb planter. Use it for a beautiful indoor herb garden or as a fun tabletop garden for your patio.

These small plant stands are so easy, you can whip up a countertop herb garden in just minutes. About 15 minutes to be exact!

15 minute Countertop Plant Stand (1)

Transforming a few inexpensive clay pots and a cedar fence picket into a mini garden is such a simple wood proejct.

This post may contain affiliate links. As an Amazon Associate I earn from qualifying purchases. Click here to read my full disclosure policy.

You will want to make simple plant stands for everyone you know. Fill them with herbs, flowers, or succulents!

15 minute Countertop Plant Stand (2)

I decided to join in on this month’s Craft Lightening because sometimes you just need a good 15 minute craft. I have been working so hard planning the kitchen remodel, that this little break was so refreshing.

I used my 15 minutes in the garage making a super quick countertop plant stand to hold my clay pots. And I am sharing the mini herb garden plans with you today!

15 minute Countertop Plant Stand (3)

I chose to use a 5 1/2″ wide cedar fence picket to make my countertop herb garden. Cedar is great because it resists rot so the water from the herb garden is not going to hurt it.

It also gets a beautiful patina over time.

I love using cedar for outdoor projects and I plan on putting my cute countertop herb garden on the outdoor kitchen island so I am ready to cook up some delish dinners on the BBQ.

15 minute Countertop Plant Stand (4)

But this would also make the perfect indoor herb garden planters. The three clay pots will be perfect in the kitchen window with your favorite plants.

Or you can use it as a centerpiece for a rustic dining room table. And how fun would it be to make this easy DIY for gifts, who wouldn’t love a little herb garden?!

There are so many indoor herb garden ideas.

15 minute Countertop Plant Stand (5)

How to Make a Countertop Plant Stand

Tools & Materials

Recommended Tools:

  • Miter saw
    • You could also make the cuts with a hand saw and miter box. It might just take a little longer so it would be a 30 minute craft (depending on your sawing skills).
  • Finish nailer
    • I love my Ryobi battery powered nail guns, especially for quick projects because I don’t have to take the time to hook up the air compressor. Just aim and go!
  • Jig saw
  • Measuring tape
  • Clamps

Supplies:

  • (1) 5 1/2″ wide cedar fence picket, 6′ long
  • (3) 4″ terra cotta pots
  • Wood glue
  • 1 1/4″ finishing nails
  • Herbs or plants

Cut List

Cut out the pieces according to the easy to read table in the PDF plans.

15 minute Countertop Plant Stand (6)

STEP 1- Build center of stand

Attach two 6 1/2″ long pieces to the bottom of a 5 1/2″ long piece. Add wood glue to the top of the pieces and lay the other piece on top of them to create an upside-down U.

Secure with 4 finishing nails on each board.

Attach 3″ pieces on either side of the bottom so the angled sides are touching. Add wood glue to the angled sides and then secure with 4 finishing nail on each board.

Getting the nails in at the right angle can be tricky, just try to keep the nail gun parallel to the floor so the nails go into the bottom.

15 minute Countertop Plant Stand (8)

Turn the upside-down U over and place the 12″ piece on top of it. Center it and secure with wood glue and finishing nails.

15 minute Countertop Plant Stand (9)

STEP 2- Attach sides

Trace a 4″ circle on two 6″ side pieces.

Trace the circle so it is 3/4″ in from the sides and 3/4″ in from the straight cut side (it will be about 1 1/4″ away from the angled cut side.

15 minute Countertop Plant Stand (10)

Drill 2 holes in the opposite sides of the circle big enough for your jig saw blade. Then using the jig saw, cut out the circle.

Try to keep the blade just on the inside of the 4″ circle so the pots fit tightly. I like to clamp the small piece to the work table when I cut it with the jig saw to give me a hand.

15 minute Countertop Plant Stand (11)

Place the pieces with the circles cut out on top of the angled board coming off the bottom. Secure it with wood glue and finishing nails so it is attached to the angled board.

Then press it securely to the upside-down U and secure with glue and finishing nails. Repeat on the other side.

15 minute Countertop Plant Stand (12)

STEP 3- Finish the stand

Trace the 4″ circle on the center of the top piece. Cut it out the same way you did before.

This one was easier to cut out after the planter was assembled, but you could do it before if you want.

Also, feel free to sand and paint/stain the wood. I love the raw cedar and so I left it be.

15 minute Countertop Plant Stand (13)

Now all you need to do is place your clay pots in the 3 holes and fill them with your favorite herbs.

Don’t forget to grab the printable PDF plans here!

Printable mini plans include:

  • Recommended Tools
  • Shopping/materialslist
  • Easy to read cut list table
  • X-ray view with measurements
  • Step-by-step instructions
  • BONUS: 3D SketchUp file

I chose basil, cilantro and rosemary and cannot wait to use them up this spring.

Fresh herbs are the best and our new countertop herb garden will make enjoying them much easier!

15 minute Countertop Plant Stand (14)

Happy easy building!

15 minute Countertop Plant Stand (15)
15 minute Countertop Plant Stand (2024)

FAQs

What can I use instead of a plant stand cheap? ›

Upcycle a wire frame into a plant stand

If you've got an old waste paper basket or even a large metal fruit bowl, you can easily transform a wire basket into an outdoor plant stand. You can easily turn an old lampshade into a plant stand, simply by taking off the fabric and adding on a top.

How do you make a simple plant stand? ›

Modern Outdoor Plant Stand

To make it, cut plywood into 22x22-inch squares. Trace and cut a circle in the middle of one board to fit and hold a bucket. Once you've adhered the plywood pieces to form a square, simply prime and paint the plant stand in your favorite color.

What else can a plant stand be used for? ›

7 At Blissfully Domestic, a plant stand was used to hold linens in the bathroom. 8 A small, low plant stand is used as a cake holder on Cake Central. 9 Metal, multi-teired plant stands can be very useful for displaying buffet foods as done on Country Living.

How big should a plant stand be? ›

For tabletop plants or small potted plants, opt for a plant stand that is about 1-2 feet tall. For medium-sized floor plants, a stand between 2-3 feet in height is recommended. Tall floor plants or plants you want to showcase as a statement piece should be adorned with a stand around 3-4 feet in height.

What can I use to hold my plant upright? ›

The most basic form of staking, ideal for single-stemmed plants that are a little top-heavy, is to use simple straight stakes. Examples include flowering plants or those that have outgrown their stems quickly.

What makes a plant stand erect? ›

"A plant can not stand erect without a cell wall." This statement is correct because in a plant cell the cell wall is a rigid, and hard and protective structure. It makes the plant shoot hard and rigid so that the plant can stand erect and prevents the plants from bending down and getting broken.

How do you make a leaning plant stand up straight? ›

We recommend staking your leaning plants to re-centre them in their pot. By gently tying them to a pole you will be able to offer them the support and structure they need to stand up straight. To avoid having them lean towards the light, rotate your plants 180 degrees every two weeks.

Are plant stands necessary? ›

In homes with higher windows or few spots with access to adequate light, sometimes shorter plants can have a hard time getting all the sunlight they need to live a long and happy life. You can give your plants the best chance at thriving and growing by setting them in a stand closer to the light.

How do I choose a plant stand? ›

You should consider factors such as the number of plants you grow, your taste in home decor, and the size of your house when making this decision. To give your home a uniform appearance, choose indoor plant stands with similar styles and materials, or mix and match them to create a more eclectic vibe.

How high do you hang plants? ›

Go ahead and hang your planter on the hook by its cord, adjusting its length as needed (I often aim for above eye level, but the sweet spot will depend on what else is in the space). Last but not least, step back and admire the newest addition to your plant family.

Should plants stand in water? ›

Don't let your plants sit in standing water

Leaving your plants sitting in standing water can cause root rot and other problems.

How much weight can a plant holder hold? ›

Plant Brackets

Whether you need to hang a plant, wind chimes, a bird feeder, or decorations. They can hold from 5.5 and 10 pounds, depending on the size you pick. Instead of using the same one again and over, have an assortment to make your home more lovely.

What can I use if I don't have plant food? ›

Copper pennies, aspirin, soda, white wine, bleach and lemonade are among the most popular home remedies. Lemonade is actually the closest to something that works; it can help up to a point in that flowers need nutrition in the form of sugar.

What can I put in outdoor containers other than plants? ›

What to Put in Planters Besides Plants
  1. Aesthetic Appeal. Beyond their role as plant hosts, planters can be artful displays in their own right. ...
  2. Decorative Items. ...
  3. Functional Fillers. ...
  4. Gravel and Rocks. ...
  5. Foam Peanuts. ...
  6. Herbs and Edibles. ...
  7. Basil, Mint, and Rosemary. ...
  8. Ornamental Grasses.
Sep 19, 2023

How do you keep plants alive without soil? ›

There are four methods of growing plants without soil-water culture, sand culture, gravel culture, and adsorbed-nutrient technique.

Top Articles
Latest Posts
Article information

Author: Virgilio Hermann JD

Last Updated:

Views: 5921

Rating: 4 / 5 (61 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Virgilio Hermann JD

Birthday: 1997-12-21

Address: 6946 Schoen Cove, Sipesshire, MO 55944

Phone: +3763365785260

Job: Accounting Engineer

Hobby: Web surfing, Rafting, Dowsing, Stand-up comedy, Ghost hunting, Swimming, Amateur radio

Introduction: My name is Virgilio Hermann JD, I am a fine, gifted, beautiful, encouraging, kind, talented, zealous person who loves writing and wants to share my knowledge and understanding with you.